Every item has a type, such as a Project, a Task, a Bug or an Idea. Your boards and templates bring the types they need, and you can change them or add your own, such as a Customer call with an Outcome and a Followed up box. Card types belong to the plan, so everyone working on it sees the same ones, at once.
Open Card Types
Press the Types button in the bottom-right corner (the strip shows once the tab has a board, a chart or a Sheet that shows cards). The panel lists every card type in one list, each with its colour, its glyph and how many fields it has; a type no card has yet is drawn a little grey. Whether a template or a board brought a type or you made it yourself, it works the same way: you can rename, change or delete any of them.
- Add Card Type makes a new one; press a type to edit it.
- Duplicate (the copy button on a type, or Duplicate in its editor) starts a new type from that one: same colour, glyph, fields and tabs, named "… copy" for you to rename. Nothing is added until you press Save.
- A new plan has no card types. A template, or a board picked from Start Planning, gives the plan just the card types it needs: a Hiring Pipeline template has Role, Candidate and Onboarding Step, each made for hiring, and a Kanban board Task and Action. A Blank board brings none, so make your own, or add a board that brings the types it needs. Boards you add later bring any of their types the plan doesn't have yet.
- The types keep their order: the order the boards brought them in, then yours in the order you added them. A board's Add a Card follows the same order.
Only an Editor can change the types, and only an Editor has the Types button: a Participant or a Viewer doesn't see it, though their cards still show each type's colour, glyph and fields.
Edit a Type
The type editor (titled with the type's name, Edit Task Card Type say, or New Card Type) opens over the tab (on a phone, it slides up from the bottom) in four tabs: Configuration, States, Display and Templates. It opens on Configuration, one scrolling page: the type's name and colour at the top, then Fields under them. A small red dot on a tab shows where something needs fixing before you can save. At its top right, Show Me runs a short tour of making a card type, the help link brings you here, and the cross closes it without saving.
- Name and colour (at the top of Configuration): one Name field holds all three. Press the Glyph at its start to choose one, type the name after it, and press the Colour swatch at its end to open the colour picker (any colour). Together they're how its cards look. Two types can't share a name.
- Prefix (beside Name): the letters before its cards' numbers, such as WI in WI-12. A new type gets one from its name (the first letter of each word, so Work Item is WI), and you can change it to up to 6 letters and digits, starting with a letter. Each type in a plan has its own: one another type uses is refused, and the message names that type. Renaming a type keeps its prefix, and changing it never renumbers a card. Clear the field to go back to the prefix its name makes.
- Fields (in Configuration, under the name and colour): what its card panel offers, laid out the way the panel shows them: On the Card (Title, and Votes), Details (the column beside the tabs) and each tab. Title and Status are always there, and a Plan always keeps Start and Due. Drag a field by the handle at its left to reorder it within its group (it works with a finger too), or open its ⋯ menu to move it up or down, to another group, or take it off.
- Add Field opens a gallery, laid out like Add a Widget, and works in two steps. First, pick a kind: every kind a field can be is a tile, showing a sample of what it holds, whether liveplanner's own fields use it or not. Every kind is listed, under its category, and the categories down the left jump to theirs (the one you're looking at is highlighted as you scroll): Text (Text and Long Text), Numbers (Number, Currency, an amount in the currency you pick, shown as "£12,500", Percent, how far along something is, below, and Rating, stars out of a scale you pick from 3 to 10), Dates (Date, Date and Time, Date Range and Date and Time Range), Time (Duration, hours and minutes, and Time Tracking, time tracked with a timer, below), Choices (Choice, one of the options you list, Multiple Choice, several of them, Checkbox, Checklist, Labels and Colour), People (Person, Several People, Comments and Votes), Links and Images (Link, Pull Request, a GitHub pull request, Email, an address that opens in your mail app, Phone, a number that calls on a phone, Image, a picture you upload, and Several Images, up to 20 of them) Cards (Link to Card, a link to one card of the types you tick under Links To, say a Project or an Epic, Several Cards and Blocked By, cards that must be done first) and Calculated (Calculated, Formula, Rollup and Lookup, below). Each tile is a field type of its own, so what a field is can be seen at a glance: Person holds one person and Several People a few, Link to Card one card, Several Cards a few and Blocked By the cards it waits on, Image one picture and Several Images up to 20, Date Range two days and Date and Time Range two moments, Duration a length of time and Time Tracking a timer. There's no switch inside a field to turn it into another, but Edit a field (below) can change its type. Type in Search fields to find one by name or by an everyday word ("money" finds Currency, "progress" Percent, "hours" Duration, "timer" Time Tracking, "stars" Rating, "parent" Link to Card, "yes/no" Checkbox, "due" Date, "photo" Image, "designs" Several Images); the categories then count the matches. A kind tagged Ready to use has one of liveplanner's own fields your type doesn't have yet. Then, shape it. When the type doesn't have liveplanner's own field of that kind yet, Ready to use comes first: the Assignee under Person, Start Date and Due Date under Date, Priority under Choice, and so on, each saying what uses it (the Gantt chart, Workload, notifications). One press adds it. Or make your own: name it, and fill in only what that kind needs (for a Choice, its options, one a row: press Enter for the next, or paste a list to add one a line); switch on Required if you like, watch the preview of a card change as you go, and press Add and its name. A type can hold more than one field of a kind, say a Reviewer as well as its Assignee, or two Colours, each with its own name and value; the Assignee notifies its person, and any other Person field can too (Notifies, below). Comments and Votes work the same way: Ready to use offers liveplanner's own while the type lacks it, and a field of your own needs only its name. All Kinds (or Escape) takes you back to pick another. Use the arrow keys to move between the tiles, and Enter to pick.
- Image fields hold one picture. In the card, press Add an Image (or drop a PNG, JPEG, WebP or GIF of up to 10 MB onto it) to upload one; Replace and Remove change it. The picture lives in your image gallery, and everyone the plan is shared with sees it, Viewers included. Removing it, by hand or with a rule's Clear Field, deletes it from storage 15 minutes later when nothing else in the plan or a copy of it uses it; Undo before then keeps it. Place it on cards from the Display tab to show a small thumbnail.
- Several Images fields hold up to 20 pictures, say a set of designs. In the card they show as a grid of thumbnails: press Add Images to pick several files at once, or drop them onto the grid. Each file gets its own tile while it uploads, one after another, and joins the field as it lands; a file that isn't a PNG, JPEG, WebP or GIF, or is over 10 MB, is skipped and said under the grid, and the rest still land. Press a thumbnail to open the picture full size in a new tab. Point at one (or tap, on a phone) for its × to remove it; drag a thumbnail to another place to reorder (on a phone, drag its grip), or focus it and press Alt+← or Alt+→. Every remove and move can be undone. On cards the field shows its first picture and how many more it holds, like +4. Editors and Participants add, remove and reorder pictures; Viewers see and open them. To turn an Image field into Several Images, or back, press its pencil (Edit Field, below) and pick the other: its picture is kept, and going back keeps only the first.
- Attachments hold up to 20 pictures on a card, one of them its cover: pick Image in Add Field and it's under Ready to use. Place Cover Image on the Detailed card in the Display tab and the cover fills the top of each card that has one. See Attachments and a Cover Image.
- Edit a field: press the pencil on one of your own fields. It opens the same window as Add Field, straight on the field: rename it and change anything it has, its options, scale, currency, the types it Links To, its formula, Required and the rest, then press Save. To make it another type, press All Kinds and pick one: a Text field can become a Number or a Choice, a Person Several People, a Date a Date and Time. Your cards keep their values wherever they fit (a Choice made from text starts with the values your cards already hold as its options). When some can't be kept, the window says how many before you save ("12 cards have a value; 3 can’t be kept as a Number and will be cleared."), and asks once more. The change lands on your cards when you save the type, and one Undo puts the field and every value back. Some types can't be swapped, and their tiles are dimmed with the reason when you point at them: Comments, Votes, Image (though Image and Several Images change into each other), Checklist and Time Tracking, the worked-out ones (Calculated, Formula, Rollup, Lookup), and Link to Card from anything but a card link. Boards, filters, the Gantt chart and widgets keep finding the field, as it keeps its place; one that can't use its new type falls back, as for a removed field. liveplanner's own fields (Status, Assignee and the rest) have no pencil yet. To show a field on cards, place it from Available Fields on the Display tab, like any field.
- Percent fields say how far along something is, from 0 to 100. In the card panel, drag the bar (or press anywhere on it), use the arrow keys, or type a number in the box beside it; a number over 100 is kept as 100, and emptying the box clears it. On cards it shows as a short bar with the number, say "40%", and exports draw the same bar. Boards sort, group swimlanes and search by it like a number. In a CSV, write the number ("40" or "40%"); agents and the command line do the same, and a value outside 0 to 100 is turned away.
- Date and Time fields hold a day and a time, say a meeting at "Fri 31 Oct, 17:00". Everyone sees it in their own time zone, so 17:00 in London reads 13:00 in New York; hover it to see your zone and, when it was set somewhere else, the time there. Once it has passed it turns red on the card. A plain Date field stays a day and never moves with time zones.
- Date Range fields hold a start and an end in one field, say an event's days or a trip: "31 Oct to 2 Nov". Fill in From and To in the card panel; the end can never come before the start, so moving one past the other moves both. Pick Date and Time Range in Add Field instead to give each end a time too. Pick a Date and Time or a Date Range as a Gantt chart's or calendar's dates in its settings: a range alone draws a bar from start to end, and a calendar shows a timed card with its time.
- Pull Request fields hold one GitHub pull request. Paste any of its addresses, say a link to its Files tab, and the field keeps the pull request's own address, shown on the card as its short name, like acme/web#42. The button beside it opens the pull request on GitHub.
- Phone fields hold a phone number as you type it, say "+44 20 7946 0958": digits, spaces, brackets, dashes and a leading +. The phone button beside it calls the number on a phone. Export CSV writes it exactly as typed, the + and the spacing kept.
- In a CSV and from AI agents, a Date and Time is written as an ISO 8601 time with its offset, say
2026-10-31T17:00:00Z, and a Date Range as two days or times joined by/, say2026-10-31/2026-11-02. Import CSV also reads a time without an offset ("2026-10-31 17:00") in your own time zone, and a range written "31/10/2026 to 2/11/2026". - Duration fields hold how long something takes or took, say an Estimate of "2h 30m". Type it as "2h 30m", "90m", "1.5h" or "2:30" (a number on its own is minutes) and it reads back as "2h 30m". Boards sort by it, rollups add it up (a Sum of Durations stays a Duration), and formulas read it as minutes, so
Estimate / 60gives hours. In a CSV and from agents, write it the same way. - Time tracking: pick Time Tracking in Add Field (call it Time Spent) and the card panel gets a Start Timer button. The timer keeps counting when you reload or switch devices, and everyone sees a green pill with your picture on the card while it runs. Stop records an entry with your name and the time (a timer stopped in under a minute records nothing), Add Time records time you worked without the timer, and the field shows the total of everyone's entries. Two people can run timers on the same card at once; both count. A Participant tracks and removes only their own time, an Editor can stop or remove anyone's, and a Viewer sees it all but can't change it. Undo takes back an Add Time or a removed entry. Duplicating a card leaves its time behind. The Time board widget adds up the hours on a board's cards and shows how many timers are running.
- Calculated fields work their value out for you. Pick Calculated in Add Field, then a Calculation: Child Count counts the cards that link to the card through a Link to Card field (a Project's tasks, through Parent), and Children Done (%) shows how many of them are done, meaning in a column that counts as done, as a percentage. Switch on Show as Percent Bar for a Children Done and it draws as a Percent field does, a bar on the card, in the panel and in exports. The card panel shows the value with a calculator icon and can't be typed into; place it on cards from the Display tab. It updates as soon as a linked card moves, is added or goes to the Trash. Forms, Import CSV and sorting leave it out (but not a Formula, Rollup or Lookup, below).
- Formula fields do sums with the card's own fields. Pick Formula in Add Field and write it with your field names:
Budget - Spent,Estimate * Rate,days(Due - Start)orif(Score >= 8, "Strong", "Weak"). Press a field or a function under the box to write it where the cursor is; a name with other characters goes in braces, like{Children Done (%)}. Use+ - * /, brackets, comparisons (=,!=,<,>=and so on) and the functionsround,min,max,abs,if,and,or,not,days,today,concatandlen. Pick a Result (Number, Currency, Percent, Text, Date or Checkbox) to say how it reads:Spent / Budget * 100as a Percent reads "40%", and Show as Percent Bar draws it as a bar. The line under the box checks it as you type, naming a field it doesn't know or a bracket it's missing, and Preview works it out on one of your cards. A field that holds several people or cards counts withlen()and joins withconcat(). Renaming a field keeps formulas working; deleting one shows the problem on the field instead of a value. Boards can sort by a Number, Currency, Percent or Date formula, lay swimlanes by one that gives a number, a percent, a date, text or Yes and No, and Export CSV includes it. - Rollup and Lookup fields read other cards for you, so nobody copies values by hand. Pick Rollup in Add Field to total the cards that link here: choose Through (All Linked Cards, or one Link to Card field such as Parent), what to Calculate (Sum, Average, Min, Max, Count, Count Done, Earliest or Latest) and the Field to read, say a Project's Total Points (Sum of Points), Total Spend (Sum of Cost) or Last Due (Latest Due Date). Archived cards count; cards in the Trash don't. Pick Lookup to show a field of the card a Link to Card field links to, say a Task's Project Due or Client Email. Each reads as the field it reads: a Sum of a Currency field stays in that currency, a Lookup of a date is a date, and an Average of a Percent field can show as a Percent bar. Preview works it out on one of your cards. A formula can use a rollup's or lookup's value by its name, and a rollup can total a formula. Boards sort and lay swimlanes by them, and Export CSV, sheets, image exports and AI agents read them too.
- Required fields: switch on Required in a custom field's settings (any kind but Checkbox, Calculated, Image, Comments and Votes) and every new card of the type needs a value for it. Making one, from a board or a linked card's New button, first opens a New Task dialog (named for the type) asking for the title and each required field; Create waits until they're all filled. A card can't have the field emptied afterwards, though you can change it. Cards made before the field was required keep working until someone fills it in. A required field shows a red asterisk after its name, in the card and in the type editor. Import CSV skips rows without one and says how many, and a form for the type can't be published until a required question goes to each one.
- Comments fields hold comment threads of their own. Give a type a Design Review and a QA Notes beside its Comments, and the card shows each one at the end of its Overview tab, under its name, with its own New Thread and its own threads. Place one on cards from the Display tab and its chip counts the comments in its own open threads. A thread stays in the field it was started in; if the card's type stops offering that field, the thread shows under Comments instead (or the type's first Comments field), so none is ever hidden.
- Votes fields hold votes of their own, say a Priority Vote beside the type's Votes. A new one sits On the Card, and placed on cards from the Display tab it shows its own ▲ count, as Votes does. Votes still come only from a dot vote: when the tab's card types offer more than one Votes field, the vote's set-up asks which one to Count In (Votes first). A card whose type lacks the field picked keeps its dots in Votes. Top Voted and sorting by votes read Votes.
- Notifies: every Person field has a Notifies switch, which tells its person when a card is theirs: it lists under Assigned to You in their Inbox, may email them, and shows on the board's Only Mine. The Assignee's is in its ⋯ menu in the type editor and starts on; a Person field you add has it in its settings and starts off. Switch it on for a Reviewer, say, and the card is theirs too. Someone two fields name is told once, and a custom person (someone without an account) is never told.
- Several People and Several Cards hold more than one value. Pick Several People or Several Cards in Add Field for Reviewers, a pair, or Related cards. The card panel then shows a chip for each person or card, each with an × to take it off, and + to add more from a list that stays open while you pick (pick one again to take it off). Cards show the first three people as overlapping discs, or the first three linked numbers, then +N for the rest. A board laid out by the field puts the card in each person's or card's row; drag it from one row to another to swap that one for the new one. A Person field that notifies tells everyone it holds. Agents write several as a comma list, "Sam, Ana", Import CSV takes one for a Person field, and Export CSV joins them with commas.
- Link cards together: add a Link to Card field to say how one card relates to another. Make a Person type and an Objective type, then give Objective a Link to Card field named Owner that links to Person. On an Objective, Owner is a field you click to pick a Person from a list (type to filter a long one); the arrow at its end opens that Person. On the Person, the Linked Cards tab holds a Linked as Owner section listing every Objective it owns, with New Objective to make one already linked and Link Existing to link one you already have: search for it by number, title or type and pick it. Only cards of the types the field is on are offered (each named by its type when there are several), never the card itself, one already linked here, or an archived or trashed card. A card already linked to another Person says so, and picking it asks first, since it moves here. Undo puts it back. When that list holds more than one card type or state, menus above it narrow it to one type or state. A board can lay its rows by Owner too, one row per Person. Parent is one of these too: a Task's Link to Card field to Plans. Rename it, point it at other types, or remove it, like any field you add.
- Blocked By: pick Blocked By in Add Field and the cards it holds block the card, say a Task's Blocked By listing the Tasks it waits on. While any of them is outside a done column, the card shows a small red link with how many are still open, on every board, at every card size and in image exports. The card panel lists its blockers with their state, a tick on the done ones, and the other cards list it under Blocks. A Gantt Chart draws an arrow from each blocker to the card it blocks. Trashed and archived blockers are ignored. A card can't wait on itself through other cards: picking one that already waits on it is refused, and the panel says which cards make the loop. Only an Editor sets the links; Participants and Viewers see them.
- Tabs: each tab is a group in Fields. Rename it in its heading, move it with the arrows, or take it off with the cross (its fields go to Details). Add Tab makes a new one (up to six); Add Field at the foot of a group adds the field straight into it. Details and Overview can be renamed but always stay, and a tab left empty is dropped when you save. A type starts with one Overview tab holding its description, checklist and comments.
- Tab icons: each tab, and Details, wears an icon, shown before its name on the card's tabs (on a phone too) and in the Details column's heading, so a card with several tabs reads at a glance. Press the icon at the start of a tab's heading (or the Details heading) to open the same glyph picker as the type's own: search, or pick a category, and press one. Until you choose, Overview shows a page, Details a checklist and any other tab a board; Reset To Default, at the foot of the picker, puts that back. The icon is saved with the type when you press Save, and Undo takes it back like any change to the type. The card's own tabs have theirs too: Linked Cards a link, Activity a clock and Hidden a crossed-out eye. A type built on another (below) shows its base type's icons. AI tools set them too, by glyph name.
- States starts with Order: the statuses this type uses, numbered in the order the card's Status list shows them, on every tab. Drag a status by the handle at its left to move it (it works with a finger too), or focus the handle and press Alt+Up or Alt+Down; its cross turns it off. Under Order, every status your boards use is listed under its board, each with a tick box; Select All and Deselect All do them all at once. Tick one and it joins the end of the order. Untick one and cards of that type can never be moved into it: the column turns red with "Task cards can't be Done" when you drag one over it, and the card's Status list leaves it out. When you add a board, or a column to a board, its new statuses are added only to the types that board takes: a new Bug Triage board's statuses don't appear on your Stories. A board that takes every type adds them to every type. You can turn them all off: cards of that type then stay in whichever column they're made in. Pick a Default State under them to say where a card of that type starts when it's made outside a board (from a linked card's New button, or by an AI tool); a card added to a board always takes that column's state. Types a template or board brings start with one already: Plans in Backlog, Tasks, Actions and Notes in To Do, Ideas in Ideas, Candidates in Applied and so on, whenever your boards have a state of that name (the menu shows it picked until you choose another).
- Display arranges this type's cards at each card size, right on the card: pick Minimal or Detailed, then drag any field to any part of the card (the header, under the title, the footer...): the field follows your pointer and a bar shows where it will land. To take a field off, drag it onto Available Fields or press its cross (shown when you hover it, and always on a touch screen); Escape cancels a drag. Available Fields lists the fields not on the card yet: drag one onto the card, or press it to choose where it goes. Each type a template or board brings starts with its own sensible layout (Notes and Ideas lead with their votes, Actions with their due date and checklist); its Reset to Default button puts a size back. When the type has a Colour field of its own, Card Colour under the card picks which Colour field tints its cards and Gantt bars: the built-in Colour, or yours (say a Team Colour).
- Age is a field you can add from Available Fields to show how long each card has sat in its column, as a small "4d" with an hourglass. It stays quiet for the first week, turns amber at 7 days and red at 14 (the same line the Stale Cards widget draws), and moves on by itself at midnight. Cards in a done column never show it. No type shows Age until you place it.
- Created At, Created By, Last Edited At and Last Edited By sit with Age under Filled In Automatically in Available Fields, on every type. Place one to show when a card was made or last changed (a small "Created 3 Oct" or "Edited 31 Oct", the full date and time when you hover it) or who did it (their picture). They fill themselves in and nobody can type into them. A vote's dots, a card's place within its column and the Actions board keeping a card in step with its action don't count as an edit. A card from before these were kept shows nothing rather than a guess. The card's own panel shows the same at the foot of its details: who created it and when, and who last edited it.
- Templates holds the type's card templates: ready-made starting values for a new card, say a Bug Report with its steps to reproduce, or a Release with its checklist. Press New Template, give it a name, then fill in the card's own fields just as you would on a card: its Title (left empty, a card takes the type's usual title), Description, Checklist, Labels and your own fields. A template never holds a state, an assignee, dates or worked-out values: a card takes those from where it's made. The list down the left (above, on a phone) picks which template you're editing; each one's ⋯ moves it up or down or removes it. A type holds up to 10 templates, each as big as a card can be. Templates are saved with the type, so Cancel drops your changes to them too, and a duplicated type copies them. Only an Editor changes them. AI agents can add and edit them, and start cards from them, through the MCP server. How to start a card from one is in Card Templates.
- Press Save to apply the whole edit, or Cancel to leave it as it was. If something is missing (a name, a Choice's options), it says so beside Save. Undo takes a saved change back.
Taking a field off a type never deletes anything: items keep what they hold in it, and it shows again if you add the field back.
Limits
A plan holds up to 32 card types. Each type holds up to 24 fields, 12 of them custom, and up to 6 tabs. A Choice field has up to 20 options.
Build a Type on Another
A card type can inherit from another, its base type, so several types share one set of fields kept in one place: a Bug and a Story built on one Work type, each adding fields of its own.
- Set it up: in the type editor's Configuration, beside the name, pick the base type in Inherits From (it only appears once there is another type to inherit from). The type takes its fields (in the base type's order, with every setting: options, Required, Notifies and the rest), its tabs, its statuses and their order, its Default State, and its Display at each card size, at once.
- What stays its own: its name, colour, glyph, new-card title and templates. It can add fields of its own, which go under Details, after the base type's.
- Inherited fields are locked: each shows a lock ("Inherited from Work") and has no Edit, Remove or Move. The States and Display tabs show what it takes, read-only, with "Bug takes its states from Work. Change them on Work, or Detach to give Bug its own."
- Change the base, change them all: a field added to, removed from or renamed on Work changes on Bug and Story in the same save. Because the fields are the same, a card keeps its values when its type changes between Work and Bug.
- Detach (the scissors beside Inherits From, or picking None) makes it an ordinary type holding a copy of the base type's settings as they are, no longer following it. Deleting a base type detaches every type built on it the same way, so none loses a field.
- One level: a base type can't itself inherit, so a type others build on has no Inherits From menu, only a line naming them ("Bug and Story inherit from this type."). A base type is still an ordinary type, with cards of its own; a board that takes Work doesn't take Bug unless you tick it too.
- In the Card Types panel, a type built on another says "Inherits Work" under its name. The usual limits count its base type's fields and its own together.
Only an Editor sets or changes inheritance. AI agents can set it too, through the MCP server.
Delete a Type
Open the type and press Delete, then confirm (the last type can go too). Any cards of that type move to the Trash with it, so you can restore them there; a restored card shows as a plain Item card, keeping its fields. If a board showed that type alone, it shows and takes every type again; pick the ones it should show in its menu's Supported Cards.
Change a Card's Type
Change a card's type from the picker at the top of its panel, by dropping it into another type's row on a board, or with a rule's Change Card Type. Its fields go with it:
- Built-in fields (Title, Description, Priority, Assignee and the rest) stay as they are: every type has them.
- Your own fields carry over by name. Each field of the new type takes the value of the old type's field of the same name when the two hold the same kind of thing: an Idea's App fills a Work Item's App. A Choice value carries only when the new field has that option.
- A rule can name more. In a rule's Change Card Type, Map Fields sends a field into one whose name differs, like an Idea's Solution into a Work Item's Acceptance Criteria or its Description. It replaces what that field holds.
- Nothing is lost. A value the new type has no field for stays on the card. Its panel shows it on a tab of its own, Hidden, last of the card's tabs, grouped by the type it came from (From Idea). A value whose field or type was deleted shows there too, as Removed Field. Change the card back and the values show in their fields again.
On the Hidden tab an Editor can Copy To Field, which copies a value into one of the card's own fields that can take it, or Remove it from the card. Each is one change you can undo. A Participant or a Viewer sees the tab but can't change it. The tab shows only while the card keeps such a value.
Where Your Types Show
- + Add Card on a board offers the types that board shows, set in its menu's Supported Cards.
- Add Card Type at the bottom of Add a Card makes a new type right from the board: only that board's states start switched on, and once you save, the board offers it.
- A card's panel lets you change its type from the picker at the top (Change a Card's Type).
- A board's rows can be one per type (Type under Swimlanes), in this panel's order.
When someone saves a change, everyone with the plan open sees their cards and panels update at once. If two people save the same type at the same moment, the later save wins.
Was this article helpful?
Still need help?
Try Troubleshooting, or tell us what you were trying to do.